Torsion CNC Router Parts Kit

$2,297.00

Build your own high performance CNC router from this kit by following the included set of plans. All hardware and electronics are included.

Out of stock

SKU: 1010000 Category: Tags: , ,

Description

A parts kit including the hardware and electronics to build your own CNC router and laser engraver/cutter.

The kit includes:

Detailed Set of Plans
6 HIWIN Linear Profile Guideway Assemblies
4 Ballscrew Assemblies
4 NEMA 23 Stepper Motors
Gecko G540 Driver with heatsink
Cables and Wiring
48 vdc Power Supply
All Hardware (Screws, Nuts, Bolts)
Aluminum Bar Stock
4 Home/Limit Switches
Emergency Stop Switch
Machine control software is free: LinuxCNC
For part design, use Fusion 360 or FreeCAD (both are free)

The kit does NOT include:

Baltic Birch Plywood and MDF
Wood Glue
Epoxy and Hardener
Router or Spindle
Computer

The plans include:

  • 70 sheets of detailed drawings on A3 page size
  • Exploded views, parts lists
  • Fully dimensioned views of each part to be built
  • Instruction manual to accompany drawings
  • Tips, recommended tools, raw materials required, and parts to purchase
  • Bill of Materials (BOM) spreadsheet

This machine is a high performance CNC machine using HIWIN profile linear guide rails and bearings, driven by C7 accuracy ball screws. The machine was carefully engineered to maximize performance and minimize cost to build, with low maintenance and high reliability. The frame components are constructed from hardwood Baltic birch plywood using a torsion box design. The torsion boxes create a very stiff structure that is very good at resisting twist and deflection during machining operations.

You will get incredible performance for the cost. As a comparison, to buy a commercially available machine of similar capability would cost anywhere from $6000 to $10000. Note that many advertised prices for kits and machines do not include electronics, or other required components.

Machine Specifications:

  • 37″ x 24.6″ x 6″ working area
  • 53″ x 44.5″ x 28″ overall size
  • HIWIN Linear Guideways
  • C7 Ball Screws
  • Gecko G540 Driver or Leadshine drivers
  • (4) NEMA 23 Stepper Motors, two on the long axis
  • Capable of machining wood, aluminum, foam, plastics, composites, more
  • Runs a common woodworking router, a spindle/VFD, a laser, or drag knife
  • >1000 inches per minute (ipm) rapid speeds
  • >300 ipm feed speeds
  • Run with open source (free) Linux CNC software, or your favorite control software

Additional information

Weight 30 lbs
Dimensions 48 × 24 × 24 in